The
ISO9000-1994: Obsolete Version of the ISO9000
ISO 9000-1994
(Obsolete) Guides and Conformance Models
The ISO 9000-1994 is the previous ISO-9000 revision. This is now
obsolete, since it has
already been replaced by ISO 9000:2000.
The ISO 9000-1994 is
divided into two categories, i.e., conformance models and guides, that
define the international standard model for quality assurance in
design/development, production, installation, and servicing. A conformance model
is a standard with which an organization must comply
for certification to that standard. A guide is a set
of recommendations for establishing an effective quality system so that
the organization may be certified to one of the three conformance models. Table
1 shows the
three conformance models and two guides of the ISO 9000-1994 standard
while Table 2 shows its elements.
Table
1. ISO9000-1994
Guides and Conformance Models (Obsolete)
|
Type of Standard |
Name of Standard |
Description |
|
Guide |
ISO 9000 |
Guidelines for selecting and using
the standards on quality management, quality system elements, and
quality assurance |
|
Guide |
ISO 9004 |
Guidelines for quality management
and quality system elements |
|
Conformance Model |
ISO 9001 |
Standard for quality assurance in
design and/or development, production, installation, and servicing |
|
Conformance Model |
ISO 9002 |
Standard for quality assurance in
production, installation, and servicing |
|
Conformance Model |
ISO 9003 |
Standard for quality assurance in
final inspection and test |
Table
2. ISO9000-1994
Elements (Obsolete)
|
ISO 9000 Standard
Element |
9001 |
9002 |
9003 |
|
4.1 Management
Responsibility |
Yes |
Yes |
Yes |
|
4.2 Quality System |
Yes |
Yes |
Yes |
|
4.3 Contract Review |
Yes |
Yes |
Yes |
|
4.4 Design Control |
Yes |
No |
No |
|
4.5 Document and Data
Control |
Yes |
Yes |
Yes |
|
4.6 Purchasing |
Yes |
Yes |
No |
|
4.7 Control of
Customer Supplied Product |
Yes |
Yes |
Yes |
|
4.8 Product
Identification and Traceability |
Yes |
Yes |
Yes |
|
4.9 Process Control |
Yes |
Yes |
No |
|
4.10 Inspection and
Testing |
Yes |
Yes |
Yes |
|
4.11 Control of
Inspection, Measurement, and Testing Equipment |
Yes |
Yes |
Yes |
|
4.12 Inspection and
Test Status |
Yes |
Yes |
Yes |
|
4.13 Control of
Nonconforming Product |
Yes |
Yes |
Yes |
|
4.14 Corrective and
Preventive Action |
Yes |
Yes |
Yes |
|
4.15 Handling,
Storage, Packaging, Preservation, and Delivery |
Yes |
Yes |
Yes |
|
4.16 Control of
Quality Records |
Yes |
Yes |
Yes |
|
4.17 Internal Quality
Audits |
Yes |
Yes |
Yes |
|
4.18 Training |
Yes |
Yes |
Yes |
|
4.19 Servicing |
Yes |
Yes |
No |
|
4.20 Statistical
Techniques |
Yes |
Yes |
Yes |
References:
www.iso.org;
www.praxiom.com
See also:
<ISO9000:2000>
Home
Copyright
© 2001-2005
www.EESemi.com.
All Rights Reserved.
